- Our Products
- Laboratory Measuring Instruments
Laboratory Measuring Instruments
|Size||58 x 15 x 108mm, *Battery : AAA x 1pcs|
Specification of Digital In/ Out Thermo-clock with Hygrometer:
- 3 meter external outdoor sensor cord,Relative Humidity (20 %~90 %),
- Min/Max Memory for Temperature & Humidity Clock Function.
- C/F selectable, Foldable Stand & Wall mountable,
- LCD size : 41 mm x 60 mm
- Unit size : 58 x 15 x 108mm, *Battery : AAA x 1pcs
DIGITAL ANEMOMETER. LUTRON. TAIWAN
MODEL: AM - 4201. WITH DATA HOLD.RANGE: 0.4 - 30.0 m / second, 1.4 - 108.0 Km / hour, 80 - 5910 ft / minute, 0.8 - 58.3 knots / hour.
DIGITAL THERMO - ANEMOMETER. LUTRON. TAIWAN
MODEL : AM - 4202. WITH DATA HOLD.
RANGE : 0.4 - 30.0 m / second, 1.4 - 108.0 Km / hour,80 - 5910 ft / minute, 0.8 - 58.3 knots / hour,
0 C - 60 C 32 F - 140 F.
DIGITAL THERMO + ANEMOMETER + HYGROMETER.
MODEL : AM - 4205. LUTRON. TAIWAN.
RANGE : 0.4 - 25.0 m / s., 1.4 - 90.0 Km / hour, 80 - 3940 ft / min., 0.9 - 55.9 mile / hour, 0.8 - 48.6 knots, 0 - 50 C 32 F - 122 F. 10 - 95% R. H. WITH RS - 232 SERIAL INTERFACE.
Digital Flow Anemometer. Lutron. Taiwan.
MODEL : AM - 4206. WITH DATA HOLD RANGE : 0.4 - 25.0 m / second, 1.4 - 90.0 Km / hour, 80 - 4921 ft / minute, 0.8 - 48.6 knots / hour,
CMM : 0 to 999,900 m / minute. CFM : 0 to 999,900 ft / minute.
Digital Flow Anemometer. Lutron. Taiwan.
Model : AM - 4206 M. With data hold, all same AS AM - 4206., But with metal vane probe.
Digital Thermo - Anemometer. Lutron. Taiwan.
Model : YK - 80 AM. With metal vane RS - 232.
Range : 0.8 - 40 m / second, 2.8 - 2144.0 Km / hour, 160 - 4930 ft / minute, 1.8 - 89.4 m / hour, 0.8 - 68.0 knots. 0 C - 60 C 32 F - 140 F.
Hot Air Oven
|Voltage||+- 2 c. Air|
|Range||50c to 250c|
Hot air ovens (memmert heater) are sturdy double walled units, inner chamber made of s. S. And outer made of mild steel with power coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated microme wire. temp. Is controlled by thermostat. Temp. Range 50 c to 250 c and accuracy : +- 2 c. Air ventilations are placed on top of both sides to remove hot gases / fumes. In memmert type units heaters placed at the right and left side of the inner chamber. All the control switches & pilot lamps are fitted on the front panel. Trays should be supplied with G. I. wire mesh.
Cup Counter Anemometer
|Range||0 to 9999.99|
|Operating Temperature||-40C to +100C|
- Cup: Copper sheet 0.71 mm thick
- Cup Arma & Socket : Aluminium alloy
- Body & Lid : Cast Aluminium
- Center spindle : Stainless Steel Rod
- WORM : Manganese Bronze Alloy
- Warm Wheel : Hard Brass
- Other parts: Made from Non Rusting Material.
- Cup Rotar Assembly:-Each of the three rotor cups shall have an internal Dia. of exactly 127.0 mm and be semi conical in shape. The spindle is supported on two bearings, ball bearing at top & thrust bearing at bottom. The assembly is made as per the instruction laid in IS:5912
- Warm & Worm Wheel :-The Worm & Worm Wheel are so designed that Worms Threads engage without friction to the Worm Wheel. The gearing ratio shall be 32 revolutions of Cup produce one revolution of the Worm Wheel.
- Body & Lid:- The body and the lid are made from Aluminium Casting and Glass window only viewing the five figure wheels of Counter.
- Counter:- It is a non-reset, direct drive revolution counter adding one counter for each one tenth revolution. The figures of the Counter shall be 7mm high is of White Pigment Colour on black background.
- Test:-The instrument is tested for balance of Cup assembly and frictionless movement is tested for ‘Spin Accuracy’ as per IS : 9512-1970 Section 7, 7.1 and 7.2. The accuracy of the instrument shall be as per Section 7.4.
- Packing:-Each instrument is marked and packed separately as per the Section 8 and 9 of IS : 5912-1970.
|Thermostat. Temp. Range||50 c to 250 c|
|Accuracy||+- 2 c.|
Body made of thick M.S./S.S. Top Plate over hangs by supporting of ceramic beeds which ensures air insulation between plate and base unit. Selection cast iron / S.S.Plate Maximum surface temperature 300 C. Temp. Controlled by energy regulator. Long last nichrome Elements. Various sizes available. To work on 230 Volts A. / C. OnlyName="Colorful Shading Accent 6"/>
Hot air ovens (memmert heater) are sturdy double walled units, inner chamber made of s. S. And outer made of mild steel with power coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated microme wire. temp. Air ventilations are placed on top of both sides to remove hot gases / fumes. In memmert type units heaters placed at the right and left side of the inner chamber. All the control switches & pilot lamps are fitted on the front panel. Trays should be supplied with G. I. wire mesh.
We are known as renowned importer and supplier of a wide range of Blood Lncets. The offered product is a small medical implement like small scalpel and has a double-edged blade or needle. These are used to make a small opening on the skin to take out blood specimens. Generally blood specimens taken are tested for blood glucose, hemoglobin, and other compounds. Also, these are generally disposable.
The offered product range consists of following:
- Medipoint Blood Lancets, U.S.A., (Pkt of 200 Pcs)
- Medipoint Blood Lancets, U.S.A., (Box of 10,000 Pcs)
- Readypoint Blood Lancets Korea (Pkt of 1000 Pcs)
- Readypoint Blood Lancets Korea (Box of 10000 Pcs)
- Imported Blood Lancets (Box of 200 Pcs) (Pkt of 200 Pcs)
- Imported Blood Lancets (Box of 10000 Pcs) (Box of 10000 Pcs)
- Disposable Plastic Blood Lancets for Glucometer Imported (Pak of 100)
|Type Of Model||Laboratory, Industrial|
|Chamber Size (mm X mm X mm)||Customized|
|Voltage||230 Volts A.C|
It is light weight and fast heating equipment. Most useful for Ashing, Fasions, Igniting and heat treating of small parts in chemical, industrial fields, colleges. Out side body made up of heavy gauge M.S /G.I duly powder coated Inner muffle with high temp. insulating Maximum Temperatures 1000 C/1200 C & working temperature 930 C/1130 C. Temp. Controlled by Digital Temperature Controller cum Indicator. Heating elements made of kenthal wire would extremely on the muffle. Control panel fitted on top of the units with indicating Lamps & Switches. A Uniform heat distribution through all 4 sides with kental wire. A special solid state silver fuse for protection to elements in case of over heating. Operates on 230 Volts A.C Only. Various Sizes Available.
The moisture contents of grain seeds, food products, paper, soap powder and soap cakes is an important factor in the production and packaging process. Moisture content of products such as paper, cement, biscuits, etc. decides their shelf life. Moisture meters are also used in the field of oil prospecting in oil wells. Different types of moisture meters are available in the market which are based on the conductivity measurements, capacitance measurements at de and at low frequencies. Number of microwave and time domain moisture sensors are available in the market and are being used in the soap and paper industries. Some of the sensors work on the principle of measurement of fractional power absorption in the material to be tested. We are offering a comprehensive range of Digital Moisture Meter to our clients. Incorporated with superior technology, our range is properly packed in a box with storage case. These meters are accurately fabricated by vendors in order to ensure durability and smooth performance. Adding on, we deliver the range with user manual along with 1 year warranty.Portable Moisture Meters are easy-to-use, hand-held devices that measure the moisture content of a wide range of products.
Range- Grain, wood, Concrete, Cotton, Seed, Coal, Saw dust etc.
Made in- Japan, Taiwan...
Sizes- 15cm/2185, 30cm/2310, 45cm/2577 ....
|Application||Industrial Ovens, Heaters|
Body of the Mantle is made up of spun joint less aluminium. Heating element knitted fibreglass netting properly insulted. Long lasting element made by nichrome wire. Maximum surface Temp. 400 C. Temp. Controlled by energy regulator. Non breaking nichrome connection having porcelain beeds covered to nett. Easy to replace the netts.
Portable Digital Hardness Tester
We are offering Digital Hardness Tester: Portable Hardness Tester for Metals This series of hardness testers are advanced integrated portable units, distinguished by their compact design, high accuracy, wide measuring range and simplicity of operation.Based on the Leeb's principle, these hardness testers are designed to carry out hardness tests on metals in various conditions and environments.
This Series hardness testers cover a broad range of applications in industry and supply the required test results, in almost every application, where fixed hardness testers can not be used. These portable hardness testers conform to ASTM A956 standard.
Tablet Hardness Tester
|Diameter||1ST RANGE 0-15MM, 2ND RANGE 0-35MM|
With vast and rich industrial experience, we offer a wide range of Tablet Hardness Tester, available in horizontal test plate and it is suitable for all types of shapes. We manufacture these testers using sophisticated technologies and machineries. It is remarkably featured with Constant rate of loading, exactly reproducible results and because of fatigue-proof counterweight principle. Moreover, it is widely preferred in Pharmaceutical industries. This product is available at an affordable price.
- Constant rate of loading
- Exactly reproducible results
- Because of fatigue-proof counterweight principle
- 1ST RANGE 0-15MM, 2ND RANGE 0-35MM
Crushing Strength Shown In N, kp SC, On Linear Scale
Constant Temperature Water Bath
|Country of Origin||Made in India|
Double walled in construction. Inner chamber and lid made of Stainless Steel Outer chamber made of Mild steel with powder coating,Glass window is fixed on the front for both sides clear observations while immersion test The gap between the chambers filled with high grade glass wool to minimize the heat loss Temp. Range from ambient to 100 C and temp. Controlled by digital temp. Indicator cum controller with an accuracy of + 0.5 C
Electric Bunsen Burner
This apparatus consists of heating element.It is in conically shaped refractory crucible.It is enclosed in an insulated S.S. casing.Casing is mounted on top of S.S. Cylindrical housing. Maximum working temp. 700 C. approximately Temp. controlled by energy regulator.
|Power||640W Lab B.O.D Incubator|
Designed Specially biological Oxygen demand determination and other applications like general incubation, serum studies and enzyme assays tests. Castor wheel mounted cabinet is double walled.Inner chamber made of Aluminium / S.S.Outer chamber made of M.S. with powder coating.
Full length inner glass / acrylic door permits inspection of specimens without disturbing the temperature. Temp. Controlled by Digital Temp. Controller cum indicator. Temperature range 5 C to 50 C with a 0 accuracy of 0.5 C. This unit is fitted with door operated illumination lamp inside the chamber. Equipped with vertically sealed compressor. Air Circulation Fan for maintaining temp.Uniformity through out the chamber. Flush fitting insulated double walled door has magnetic gasket. The chamber is provided with modular removable shelves made of S.S.for complete flexibility is use. Inner chamber is fitted with refrigeration evaporator, heater and air circulator for creating positive Air flow through out the inner chamber for temp. Uniformity, to work at 230 V A.C. only.
|Air-Flow Direction||Horizontal Air Flow|
|Voltage||230V, AC, 50 Hz.|
Vacuum ovens (round) are double walled. Inside chamber is made of thick stainless steel 304 quality.
Outside chamber made of mild steel sheet pregreased, pretreated for rust proofing and powder coated. High grade glass wool insulation between the chambers to avoid heat loss. Uniform drying under Vacuum. Temp. ranges from 50 C to 200 C with +_ 2 C accuracy. Precise Vacuum control to 30Hg displayed on Analog gauge. Temp. Controlled by digital temp. Indicator cum controller. Vacuum chamber is wrapped with set of high quality heaters for quick and uniform heating. Door has a thick tempered toughened glass window. Perfectly sealed with silicon rubber gasket for observation without disturbing thermal condition. Proper door alignment to ensure excellent Vacuum performance and operators safety. Positive screw to tighten the lid to obtain perfect seal. Fitted with diaphragm valves and vacuum gauge. Control panel with temp. Controller Switches and indicating lamps provided on the front panel.
- Working chamber 30 x 22.5 Cm.
- Suitable for 230V, AC, 50 Hz.
- Available in rectangular chamber also. Vacuum control and relief valves located on front of unit for convenient monitoring.
|Application||Laboratory & Pharmaceuticals|
|Automation Grade||Fully Automatic|
|Insulation Wall||Double Wall|
Reliable convenient method of steam sterilization. Inner chamber made of thick S.S.Outer chamber made of M.S / S.S. immersion type heater should be provided. Lid is made up of S.S. and die pressed.It is equipped with pressure gauge, steam release valve and safety valves.This instrument supplied with Aluminum / S.S. Basket.Pressure controls by spring Valves.It is used for sterilization under working steam pressure up to 15 PSI. Fitted with silicon rubber gasket joint less, to work on 230 Volts A./C. only.
Foot lifting arrangement. Digital temperature indicator cum controller Water level indicator Auto cut off.
|Country of Origin||Made in India|
|Voltage||+ 2 C. Air|
Bacteriological incubators (Memmert Type) are sturdy double walled units. Inner chamber made of S.S. and outer made of mild steel with powder coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated nicrome wire. Temp. is controlled by thermosta Temp. range 5 C above ambient to 60 C and Accuracy: + 2 C. Air ventilations are placed on top of both sides to remove hot gases/fumes. In memmrt Type units heaters placed at the right and left side of the inner chamber. All the control switches & pilot lamps are fitted on the front panel. Trays should be supplied with G.I. wire mesh.
Air circulation fan for uniform temperature, Digital temp. controller cum indicator in lieu of thermostat with an accuracy of + 1 C , S.S. trays. Out side chamber made of stainless steel.
Avail from us a wide range of Electric Balances, manufactured by some of the leading vendors using superior quality basic material. These are used to weigh both small and large amount with accuracy & precision. Apart from being reliable in performance, these are also user friendly, facilitated with digital display and accurate readings.
|Type Of Instruments||na|
Assisted by a rich vendor base, we are engaged in procuring and supplying a wide range of Measuring Barometer. These Barometers are offered at market leading prices and are used measure atmospheric pressure. Our Barometers are capable of measuring atmospheric pressure using water, air, or mercury. These are also known for reliable performance and accurate measurements.
The offered range of Barometers comprises:
Aneroid Barometer (Dial) Type:
a) Barometer German, 85mm Dia
b) Barometer Barigo German 85mm Dia Cat No 121
c) Barometer Barigo German 100mm Dia Cat No 141
d) Barometer Fisher German 100mm Dia Cat No. 1366-R
e) Barometer Barigo, German 130mm Dia, Cat No.191
f) Barometer Barigo German 130mm Dia Cat No 190
g) Barometer German 130 mm Dia
h) Barometer Sunartis German 260mm Dia Cat No B
- Fortins Barometer with Brass Parts Indian w/o Mercury
- Digital Barometer with humidity, temperature (in / out) & clock, German make, with weather forecast, transmission of out door temperature via transmitter, pressure, barometer trend, table or wall mount
- Digital Barometer model ws-7396, with humidity,temperature, with wireless remote sensor
|Voltage||230 volts A.C|
Chemistry Lab Apparatus
Chemistry Lab Apparatus: Advanced Microprocessor Based instrument suitable for both USP methods. Calculates all important values/ratios, with built-in Validation program. IQ, OQ, PQ,Protocols,are provided with instruments on request,
Tap density/bulk density test apparatus:
Simple reliable apparatus. Same as model: VTAP/MATIC-II, but provided with mechanical timer instead of microprocessor based circuit and digital LCD screen display etc. Can be used for both USP-I & USP-II methods,
Blood Pressure Apparatus
We are one of the renowned suppliers of a wide range of Blood Pressure Apparatus. Owing to the features like accurate reading, reliable performance and user friendly interface, these are extensively used in Medical Industry. Also, leading physicians recommend these to be keep in home to keep a regular check on BP level owing to their accurate reading and digital display.
Our range of Blood Pressure Apparatus comprises following products:
- BP Apparatus Mercurial
- BP Apparatus Dial Type 300mm, complete with Bulb & Velcro Cuff China make (Same as Japan)
- BP Apparatus Mercurial China
- BP Apparatus Mercurial Regular model with ISI Diamond make
- BP Apparatus Mercurial Deluxe model with ISI Diamond make
- BP Apparatus Mercury Free with LCD Bar Diamond make
- Digital BP Apparatus "Omron" Brand Japan make
- BP Apparatus fully automatic arm type model SEM-1
- BP Apparatus fully automatic wrist type model REM-1
- BP Apparatus fully automatic arm type model SEM-2
- BP Apparatus fully automatic wrist type model REM-2
- Sphygmonometer Mercury Free model DM-500 Nissei Japan
- BP Apparatus Manual inflate digital BP Monitor model DS-400 NISSEI JAPAN
- BP Apparatus Digital model DS - 1902 Nissei Japan
- BP Apparatus Digital Wrist type model WS - 820 Nissei Japan
- BP Apparatus & Body Fat Meter Wrist type model No. WT-20 Nissei Japan
- Digital BP Apparatus "Citizen" Brand Japan make
- BP Apparatus Semi - Automatic model CH - 302 B, with easy manual operation
- BP Apparatus Fully - Automatic model CH - 432B, with automatic operation
- BP Apparatus Wrist type model CH – 656C
- Digital BP Apparatus Fully automatic arm type "Infi Check" brand GBR Germany make (with warranty)
- Digital BP Apparatus fully automatic wrist type "Infi Check" brand GBR Germany make (with warranty)
- Clinical Thermometer "SMIC" Gold, Oval with ISI Mark
- Clinical Thermometer, Digital, "MCP" imported & more 120
Our clients can avail from us a superior quality range of Balance Imported. These instruments are sourced from renowned international vendors who use superior grade components in their production process to ensure defined industry standard compliant product range. Offered at market leading prices, these are also appreciated amongst our clients.
The offered range of balance encompasses following products:
Digital Balances, Imported Taiwan make:Features:
- Attractively designed
- Desktop use
- Large 6 Digit LCD
- Auto off
- Working on (Optional) - Pencil Cell / Adaptor
|300 gms||0.1 gm|
|600 gms||0.1 gm|
|1000 gms||0.5 gm|
|2000 gms||0.5 gm / 1 gm|
|5000 / 6000 gms||1 gm|
|Ultra Precision||200 gms|
0.01 gm (with Wind Shield)
|Ultra Precision||200/300 gms|
0.01 gm (with Wind Shield)
|Ultra Precision||600 gms|
0.01 gm (with Wind Shield)
|Ultra Precision||750 gms|
0.05 gm (with Wind Shield)
|Ultra Precision||3000 gms|
0.1 gm (with Wind Shield)
|Ultra Precision||200 gms|
0.001 gm (with Wind Shield)
Digital Pocket Balance (For Multi Purpose Uses) Tanita Japan make:
- Model 1479 V Cap. 120 gm-0.01
- 200 gms-0.1 Imported Make
- 200 gms-0.01 Imported Make
Digital Pocket Balance (For Multi Purpose Uses) Imported Cap.10gm-0.01gm Citizen make :
- MP-200 200gm 0.01 gm
- MP-300 300 gm 0.02gm
- MP-1000 1000 gm 0.1 gm
- The temperature coefficient correction is settable between 0 and 2.5%/ºC for EC 215
- Conductivity: ±0.5% FS
- Resistivity: ±0.9% FS
Features of Conductivity Meters:
Four measurement ranges, Manual calibration,Automatic Temperature Compensation. Analog output (EC 215R),These instruments utilize a four ring potentiometric probe with platinum sensor that offers greater versatility over typical amperometric designs. A potentiometric probe works on the principal of induction which eliminates the effects of polarization (a common problem of amperometric systems). Two outer rings apply an alternating voltage and induce a current loop in the solution while two inner rings measure the voltage drop induced by the current loop (which is dependent on the conductivity of the solution). By utilizing the 4-ring method, it is possible to measure.very low or high conductivity levels (up to 200 mS/cm) without changing probes.The temperature coefficient correction is settable between 0 and 2.5%/ºC for EC 215. In addition, the EC 215R model offers analog output of 0 to 5V that represents the full conductivity scale across all four ranges.